🔧 Drill-Mounted External Chamfer and Deburring Tool
🔧 Drill-Mounted External Chamfer and Deburring Tool
BUNDLE & SAVE
Couldn't load pickup availability
🔧 Drill-Mounted External Chamfer and Deburring Tool
🔧 Drill-Mounted External Chamfer and Deburring Tool
Tidy a rough metal end before the next assembly step. This drill-mounted tool uses three internal cutting edges to form an external chamfer and remove suitable burrs from compatible workpieces.

Address burrs at the end of the piece
A rough bolt end can make starting a nut awkward. The tool is intended to remove suitable external burrs so you can assess the cleaned edge before trying the assembly again.

Cut a bevel with internal edges
The three-edge arrangement works around the outside of a compatible end. Use the permitted speed and gentle, controlled contact rather than pushing hard to remove more material at once.

Connect through the hex shank
Fit the shank to a compatible drill chuck or holder and confirm it is secure. Check alignment and support the workpiece before bringing the rotating cutter into contact.

Treat the edge, then inspect the result
Remove only the material required for the intended chamfer. A cleaner entry edge does not rebuild stripped threads or repair a bent fastener, so inspect the remaining condition before reuse.

Where it fits your day
Finishing a compatible cut end
Secure the piece in an appropriate holder and keep the drill aligned. Make a controlled pass, stop the tool and inspect the edge before deciding whether another pass is needed.
Preparing for reassembly
After deburring, check whether a suitable nut starts correctly. Replace damaged fasteners where the remaining thread or overall condition is unsuitable for the job.



Choose the right option
The listed color is blue. Confirm the permitted workpiece material, diameter, drill fit and speed in the instructions before use; the supplied listing does not provide those numerical limits.
Product details
- External chamfer and deburring attachment
- Three internal alloy cutting edges
- Hex shank for a compatible drill
- Color: blue
- Includes one chamfer tool
Use and care
- Wear appropriate eye protection, clamp the workpiece and keep hands clear of rotating parts. Follow the tool’s operating limits.
